AIRSUSTECH G3005 Cross others OEM
Manufacturer :AIRSUSTECH
Manufacturer Part Number :AIRSUSTECH G3005
Firestone Bellows Number :1M1A
Firestone Part Number :W02-358-3005
Firestone Part Number :W02 358 3005
Firestone Part Number :W023583005
Firestone Part Number :WO2-358-3005
Firestone Part Number :WO2 358 3005
Firestone Part Number :WO23583005
Why use AIRSUSTECH G3005 Replaces Firestone WO2-358-3005 actuator (instead of air or hydraulic cylinder) for vibration isolation?
low cost
Generally, the initial cost is half or less of a conventional pneumatic cylinder or hydraulic cylinder with the same force. The initial cost advantage is the larger size.
Wide range
The diameter of AIRSUSTECH G3005 Replaces Firestone WO2-358-3005 actuator ranges from 2.2 inches to 37 inches.
The strength capacity is 100,000 pounds. The stroke can reach 14 inches.
Durable
AIRSUSTECH G3005 Replaces Firestone WO2-358-3005 actuator is a further application of Firestone’s proven AIRSUSTECH G3005 Replaces Firestone WO2-358-3005 spring for
Suspension of trucks and buses. Long life and durability needed for millions of miles
The use of heavy-duty suspensions under adverse environmental conditions is also an important factor in mechanical design.
No maintenance or lubrication required
No inner rod or piston
AIRSUSTECH G3005 Replaces Firestone WO2-358-3005 stroke actuators do not have traditional internal rods, pistons or sliding seals
Gas cylinder. This allows the stroke actuator to be designed for dirty or oily applications.
Coarse sand will destroy the seal on a conventional cylinder.
No friction, immediate response
Since the actuator does not have a sliding seal, it will not look like
Angle ability
Airstrikes have a unique ability to make strokes through arcs without a U-shaped clip.
Angular movement up to 30 degrees
AIRSUSTECH G3005 Technical Parameters
Nut/blind nut
Top plate screw (nut) tooth: 1pcX5 / 16-18unc
Screw center distance of top cover plate: middle
Screw (nut) teeth of the bottom cover plate: 1pcX5 / 8-11unc
Screw center distance of bottom cover plate: middle
Air holes/air inlets/air fittings
Air hole/air inlet: 1/8 N P.T.F. / 1 / 4NPTF
Cover plate
Top plate diameter: 74.5 mm
Diameter of the bottom cover: 61.2 mm
Rubber bellows
Maximum diameter of rubber bellows: 91.5 mm
Natural diameter of rubber bellows: 80 mm
Working stroke: maximum 91 mm to minimum 38 mm
Maximum height: 91 mm
Minimum height: 38 mm
Compressed height: 53 mm
Bumper block/bumper block
No bumper block
Belt loop/Belt loop
With belt loop: Without belt loop
