Motorcycle Lifts Industrial Air Spring 2B15-375 578-92-3-377 Double Convoluted 1/4 OS Air Fittings Without Bumper

Top plate screw qty:4
Bottom plate screw qty:4
Air Fitting Port: 1/4
Internal bumper: No
Girdle hoop: 1 piece

Feature

Highly durable, precisely engineered and cost-effective for use in a wide variety of actuation and vibration isolation applications
Superior quality and performance—time-tested designs, fabric-reinforced neoprene or natural rubber flex member construction and corrosion-protected end retainers
As an actuator, Air Springs provide linear or angular motion
Favorable stroke-to-compressed-height ratio when compared to air cylinders and can accept a wide variety of actuation media such as air, water, nitrogen or antifreeze
As an isolator, Air Springs are effective in reducing the harmful effects of vibration
Can simultaneously isolate vibration and regulate load height as well as allow for consistent vibration isolation under varying loads
GUOMAT air spring offers a variety of air spring types to meet your actuation or isolation needs


This type of air spring can be used in motorcycle lifts

The air spring is filled with compressed air in a sealed container, and uses the compressibility of the gas to achieve its elastic effect. The air spring has ideal non-linear elastic characteristics, after the height adjustment device is installed. Due to the fundamental difference in principle, gas springs have significant advantages over ordinary springs: relatively slow speed, little change in dynamic force (generally within 1:1.2), and easy control.
As the lifting element of the lifting equipment, the rubber air spring overcomes the traditional shortcomings of the lifting equipment, requires no maintenance, has a long service life, and is easy to operate and replace.

The related picture of 2B15-375 goodyear helper bag/air springs